Konica Minolta bizhub 601 - Manual (Page 17)

15
bizhub i-Option user reference guide
Firmware Requirements
The following firmware is required in order to successfully use the MFP
with SharePoint 2007:
MFP Firmware
C652DS* A1DM0Y0-F000-GC4-88
C552DS* A1DM0Y0-F000-GC4-88
C652* A0P00Y0-F000-GC4-88
C650 A00H0Y0-F000-GJ0-GA
C552* A0P00Y0-F000-GC4-88
C550 A00J0Y0-F000-GJ0-GA
C452* A0P00Y0-F000-GC4-88
C451 A00K0Y0-F000-GJ0-GA
C360* A0ED0Y0-F000-GC4-88
C353 A02E0Y0-F000-GJ0-GA
C280* A0ED0Y0-F000-GC4-88
C253 A02E0Y0-F000-GK0-GA
C220* A0ED0Y0-F000-GC4-88
C203 A02E0Y0-F000-GK5-GA
501 A0R50Y0-0100-GJA-20
421 A0R50Y0-0100-GJA-20
361 A0R50Y0-0100-GJA-20
* Models C652DS, C552DS, C652, C552, C452, C360, C280 and C220 have one additional requirement when updating
to these firmware levels. A software switch must be set prior to using the upload feature, which is outlined in the release
notes. Its current setting can be verified by pressing the Utility Key, then pressing "Device Information" on the panel.
If the firmware switch has been set properly, the screen will report “Function Version: Version 3”.