Konica Minolta bizhub PRO 2500P - Manual (Page 64)

64 Chapter 5 Job control
Store a job
Store a job
Introduction
The booklet maker has a maximum storage capacity of 10 different jobs.
Procedure
[35]
Action
[71] Change all settings according to section 2 for a
particular job. Now the changes are just temporary.
You can run the system with these changes but as
soon as you change something again the previous
settings will be lost. To store the settings, press
[Jobs] from the Main screen.
[72] Now you have three choices:
■ Save
■ Save as...
■ Rename
Choosing Save will overwrite the current Job. The
Current Job name is displayed at the top of the
screen. Choosing Save as... gives you the option to
save it as a new job or overwriting another job.
Choosing Rename will overwrite the Current Job (if
changes were made). This is the same as the Save
option, but now you have the option of entering or
changing the name for the current job.
[73] This screen is displayed if Rename is Entered from
the Jobs screen.
Press [+] or [-] to change the highlighted character.
Press [Blank] for no character. Move the cursor by
pressing the [Arrow]. Press [Enter] when done.