Konica Minolta bizhub PRO 2500P - Manual (Page 25)

25
Remove/replace stapler head
Note: Whenever you remove a stapler head, be sure to manually eject
some staples before replacing it in the Booklet maker. To do this, rest the
stapler head on a firm surface (for example, the top of a table) and
actuate the staple driver post up/down through full travel. Do this a
number of times to ensure that the staples are ejected on each down
movement. If you need to change the staple cartridge, see (
see
‘Remove/replace staple cartridge’ on page 21 ).
Warning:
When manually ejecting the stapler, stay clear of stapler output area.
Step Action Description