Change settings, General procedure – Konica Minolta bizhub PRO 2500P User Manual
Page 30
30
Chapter 3 Make booklets
General procedure
Change settings
General procedure
Introduction
Changing settings can be performed in two ways. Temporary, which means that the
changes will remain until a new job is loaded or permanent, which means that the
changes will be stored as a job. This job can later be recalled.
Procedure for temporary changes:
From the Main screen, select the option you wish to change and press the [Enter]
button. Confirm changes by pressing the [Enter] button in the next screen.
Procedure for permanent changes:
Same procedure as for temporary changes. But, in addition, from the Main screen,
press the [Jobs] button to reach the Jobs screen. Select Save if you want to
incorporate the change in the current job or Save as... if you want to store the
changed job as a new job.
Note:
Choose either of the above mentioned procedures when changing size,
stapling, trimming or Square folding as follows.