Konica Minolta MAGICOLOR 4695MF - Manual (Page 59)

Sending a Duplex (Double-Sided) Document Transmission 53
4
Press the + or , key to select the desired transmission method, and then
press the Select key.
5
Specify the fax number of the recipient.
"
Refer to “Specifying a Recipient” on page 43.
"
To send a broadcast transmission to multiple destinations, refer to
“Sending a Fax to Multiple Recipients (Broadcast Transmission)” on
page 47.
6
Press the Start key to begin scanning and sending the fax.
"
To stop the transmission, press the Stop/Reset key. A message
appears, requesting confirmation to cancel the setting. Select YES,
and then press the Select key.
"
The transmission method returns to the default setting after the docu-
ment is scanned with a normal transmission or after transmission with
a manual transmission. It is useful if the most frequently used trans-
mission method is selected as the default. For details, refer to “FAX
TX OPERATION” on page 28.
Sending a Duplex (Double-Sided) Document
Transmission
Both sides of the document pages can be scanned and sent.
"
Duplex (double-sided) document transmission cannot be used
together with direct transmission.
1
Position the document to be faxed.
2
If desired, adjust the image quality.
"
The document image quality can be adjusted. For details, refer to
“Adjusting the Image Quality” on page 42.
3
Press the + or , key to select the current simplex (single-sided)/duplex
(double-sided) fax setting, and then press the Select key.
The SIMPLEX/DUPLEX screen appears.
"
If simplex (single-sided) transmission has been specified as the
default, 1-SIDE appears. If duplex (double-sided) transmission has
been specified as the default, 2-SIDE appears.
4
Press the + or , key to select 2-SIDE, and then press the Select key.
The ORIGINAL TYPE screen appears.