Konica Minolta MAGICOLOR 4695MF - Manual (Page 57)

Sending a Batch Transmission 51
6
Press the Start key to begin scanning, and then the machine enters trans-
mission standby mode.
appears in the screen when the machine is in standby mode.
"
If you want to cancel a timer transmission, select CANCEL
RESERV. . For details, refer to “Cancelling a Queued Transmission”
on page 57.
Sending a Batch Transmission
Multiple documents can be scanned and stored in the memory of this
machine to be sent together to a single destination at a specified time.
"
From the UTILITY menu, batch transmission settings (transmission
time) must have been registered with a speed dial number in advance.
For details, refer to “Using the Speed Dial Function” on page 45.
1
Position the document to be faxed.
2
If desired, adjust the image quality.
"
For details, refer to “Adjusting the Image Quality” on page 42.
3
Select destinations for the batch transmission from the favorite list, or
specify their speed dial number.
"
For details on selecting destinations from the favorite list, refer to
“Using the Favorite List” on page 44.
"
For details on specifying destinations by their speed dial number, refer
to “Using the Speed Dial Function” on page 45.
4
Press the Start key to begin scanning, and then the machine enters trans-
mission standby mode.
appears in the screen when the machine is in standby mode.
"
To cancel a batch transmission, select CANCEL RESERV.. For details,
refer to “Cancelling a Queued Transmission” on page 57.