Konica Minolta bizhub 20 - Manual (Page 5)

5
4
Release the scanner lock
Push the lever a in the direction shown to unlock the
scanner.
(The gray scanner lock lever is located at the back left
side, under the document cover
b .)
5
Connect the power cord
and telephone line
a
Make sure that the machine power switch is off.
Connect the AC power cord to the machine.
b
Plug the AC power cord into an AC outlet. Turn
the power switch on.
c
Follow the instructions on the LCD.
d
Connect the telephone line cord. Connect one
end of the telephone line cord to the socket on
the machine marked LINE and the other end to
a modular wall socket.
WARNING
The machine must be grounded using an
earthed plug.
Since the machine is grounded through the
power outlet, you can protect yourself from
potentially hazardous electrical conditions on
the telephone network by keeping the power
cord connected to your machine when you
connect it to a telephone line. Similarly, you
can protect yourself when you want to move
your machine by disconnecting the telephone
line first and then the power cord.
IMPORTANT
DO NOT connect the interface cable yet.
2
1
Note
If Scanner Locked appears on the LCD,
immediately release the scanner lock and press
Stop/Exit. (See Release the scanner
lock on page 5.)
IMPORTANT
The telephone line cord MUST be connected
to the socket on the machine marked LINE.