Konica Minolta bizhub 20 - Manual (Page 19)

19
Windows
® Parallel
Windows
®
Parallel
17
Connect the Parallel
cable
a
Connect the Parallel interface cable to your
computer, and then connect it to the machine.
18
Connect the power cord
a
Plug the AC power cord into an AC outlet. Turn
the power switch on.
The installation will continue automatically.
The installation screens appear one after
another.
b
Do one of the following:
„ For Windows ® 2000 Professional users,
click Next.
„ For Windows ® XP/XP Professional x64
Edition users, wait for a while since the
installation of the KONICA MINOLTA drivers
will automatically start. The screens appear
one after another.
19
Finish and restart
a
Click Finish to restart your computer.
After restarting the computer, you must be
logged on with Administrator rights.
IMPORTANT
Connect the machine directly to your
computer.
Note
If this screen appears, click OK.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
Note
If an error message appears during the software
installation, run the Installation Diagnostics
located in Start/All Programs/KONICA
MINOLTA/bizhub 20 LPT.
Finish
The installation is now
complete.