17 connect the usb cable, 18 connect the power cord, 19 finish and restart – Konica Minolta bizhub 20 User Manual
Page 14: Windows, Finish
14
Windows
®
USB
17
Connect the USB cable
a
Remove the label covering the USB interface
connector.
b
Connect the USB cable to the USB connector
on the machine marked with the
symbol.
Then connect the cable to your computer.
18
Connect the power cord
a
Plug the AC power cord into an AC outlet. Turn
the power switch on.
The installation will continue automatically.
The installation screens appear one after
another.
19
Finish and restart
a
Click Finish to restart your computer.
After restarting the computer, you must be
logged on with Administrator rights.
IMPORTANT
• DO NOT connect the machine to a USB port
on a keyboard or a non-powered USB hub.
• Connect the machine directly to your
computer.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
Note
If an error message appears during the software
installation, run the Installation Diagnostics
located in Start/All Programs/KONICA
MINOLTA/bizhub 20.
Finish
The installation is now
complete.