Konica Minolta bizhub 750 - Manual (Page 68)

Using copy functions 2
bizhub 750/600 2-31
Using copy f
unct
ions
Chapter 2
*1
If paper other than the specified paper size is
loaded, a paper misfeed may occur since the paper
size is not automatically detected.
*2
In order to specify a custom paper size in Enlarge
Display mode, the custom paper size must first be
stored before entering Enlarge Display mode. For
details, refer to the User’s Guide [Copy Operations].
*3
Wide paper is a size larger than the standard size
and allows copies of standard-sized documents to
be printed so that there is no loss at the edges. For
example, if 11×17 Wide paper is used, an area up to
11-3/4 in. × 16-1/2 in. can be printed, allowing the
entire area of an 11×17-size document to be
printed.
The following procedure describes how to specify the
size of the paper loaded into the bypass tray.