Konica Minolta bizhub 750 - Manual (Page 111)

4 Using fax functions
4-4 bizhub 750/600
Using
f
a
x
fu
nct
ions
Chapter 4
5
Press the [Start] key in the control panel.
– If the “Destination Check Display Function” was
set to “ON”, the Check Destination screen
appears. Check the destinations, and then touch
[TX].
!
Detail
Scanning of the document begins, and the fax is sent. If
the machine is set to display the transmission result
report screen, a screen appears, requesting
confirmation to print the transmission result report. To
print the transmission result report, touch [Yes].
To stop the transmission, press the [Stop] key.
If the transmission could not be completed correctly, a
transmission result report is printed.
Stop
Start