beautypg.com

Setting up netware 4.x/ 5.x/ 6 remote printer mode – Konica Minolta KN-419 User Manual

Page 39

background image

7

Connecting the Computer and Copier

7-10

KN-419

7

Select the connection settings, and check that the PServer you
created is listed in the active connections section.

* If changes are made to settings marked with “*”, turn the machine off, then on again.

Setting Up NetWare 4.x/ 5.x/ 6 Remote Printer Mode

1

Log in with administrator privileges.

2

Start up NWadmin.

3

Select the print service system or category container, and then select
“Print service quick setup” from the Tool menu.

4

Enter settings into the

Print server name

,

Printer name

,

Print queue

name

, and

Volume name

boxes, select

Remote parallel

,

LPT1

under

Type name

, and then save the settings.

Note
Specify the users who can use the queue, printer options, number
of queues, and password. Refer to the NetWare documentation for
details.

NDS

Bindery

[Enable NetWare] [*]

Enable (Enabled if check box is selected.)

[Frame Type] [*]

Auto detect (Select the frame type suitable for your network
environment.)

[Print Server Name]

Manually enter the name of the print server created in step 4.

[NDS Context Name]

The context name for the
Pserver

No settings required

[Print Server Password]

(Only specify this setting if it is also set on the NetWare server.)

[Password Retype]

(Only specify this setting if it is also set on the NetWare server.)

[Preferred File Server]

No settings required

The file server name for the
Pserver

[Preferred NDS Tree]

The tree name for Pserver
login

No settings required

[Print Queue Scan Rate]
[*]

1 (Change as necessary.)

[Connection Mode]

Directory Services

Bindery

[Mode] [*]

PServer

This manual is related to the following products: