Konica Minolta magicolor 7450 grafx - Manual (Page 221)

Hard Disk 207
3
Plug the cable on the hard disk
into the connector on the con-
troller board.
4
Insert the three mounting pins
on the hard disk into the holes in
the controller board to mount the
hard disk onto the controller
board.
5
Attach the left-side cover and tighten the screws.
6
Reconnect all interface cables.
7
Reconnect the power cord, and
turn on the printer.
8
Declare the hard disk in the Windows printer driver (Properties/Configure
tab).