Konica Minolta magicolor 7450 grafx - Manual (Page 150)

Replacing Consumables 136
11
Grab the handle on top of the
imaging unit, slightly pull it up,
then toward you to remove the
OPC drum cover.
12
Push the imaging unit to
securely insert it so that it snaps
into place.
13
Close the front cover.
"
If the imaging unit is not
fully inserted, the front
cover cannot be closed.
"
The printer must com-
plete a 75-second cali-
bration cycle after the
toner cartridge has been
replaced. If you open the
front cover before the
message
READY
appears, the printer stops
and repeats the calibra-
tion cycle.