Konica Minolta magicolor 7450 grafx - Manual (Page 110)

Media Types 96
Use postcards that are
„ Approved for laser printers
DO NOT use postcards that are
„ Coated
„ Designed for inkjet printers
„ Precut or perforated
„ Preprinted or multicolored
"
If the postcard is warped, press on the warped
area before putting it in Tray 1/2.
Transparencies
"
Do not fan transparencies before loading them. Resulting static elec-
tricity may cause printing errors.
"
If you touch the face of the transparencies with your bare hands, print
quality may be affected.
"
Keep the printer path clean. Transparencies are especially sensitive to
a dirty media path. If there are shadows on either the top or the bottom
of the sheets, see chapter 8, “Maintaining the Printer” .
"
Remove transparencies as soon as possible from the output tray to
avoid static buildup.
You can print continuously with transparencies. However, this could affect the
media feed, depending on the media quality, static buildup, and printing envi-
ronment.
Try printing your data on a sheet of plain paper first to check placement.
Orientation Tray 1
(Manual Feed
Tray)
Face down
Tray 2 Face up
Tray 3/4/5 —
Driver
Media Type Postcard
Weight 64–163 g/m² (17–90 lb)
Duplexing Not supported