Konica Minolta bizhub PRESS 2250P - Manual (Page 21)

Operator Manual STR0202 & SFM0704
DBCB-0512-0066-V005
STR0202 2-Side Trimmer & SFM0704 Square Fold Module
V005 RI01 23-04-2012 DBCB-0512-0066-V005 - 21 -
5. Troubleshooting (continued)
5.2 Clearing a Paper Jam
5.2.1 Warnings / Cautions
An increasing number of Paper Jams is an indication of the need to clean the belts.
The STR Upper Knife Blades are protected by a Knife Safety Plate that moves away during the
Trim cycle movement.
WARNING! Never put fingers or other body parts between or near the knives.
5.2.2 Clearing jams - STR
Fig.1 Fig. 2
Step Action Remarks
1.
1.1.
1.2.
Open the Top Cover.
Close the Top Cover.
The STR is trying to empty the
machine. The STR will automatically try to empty the machine
when a Paper Jam is detected.
When the jam is not cleared, the Knife blocks
will automatically move outward to create
space.
2. Pay attention to the indicated
area Pay attention to the indicated area displayed on the UI
3. Open the Top Cover.
4. Turn ‘OFF’ the STR.
5. Clear the indicated area : Take
the booklet out of the machine The indicated area is displayed on the UI.
If necessary push down the Paper Stop (A).
6. Turn ‘ON’ the STR.
A ‘Cover Open’ message will appear.
7. Close the Top Cover.
The Knife blocks will automatically return to the
position which was set for the current Job.
A