Konica Minolta bizhub PRESS 2250P - Manual (Page 17)

Operator Manual STR0202 & SFM0704
DBCB-0512-0066-V005
STR0202 2-Side Trimmer & SFM0704 Square Fold Module
V005 RI01 23-04-2012 DBCB-0512-0066-V005 - 17 -
4. Operating the STR (continued)
4.8 SquareFold Module (SFM), SQF ON / OFF
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Step Action Remarks
1. Square Folding ON/OFF Use the ‘
▲ / ▼ ’ buttons on the UI to select ‘SQF’ and
press the ‘Enter’ button (Fig. 1).
2. Adjust ‘SFM Mode’ Use the ‘
▲ / ▼ ’ buttons (Fig. 2) to select ‘Mode’:
Off for about 1 to 5 sheets (bypassing the SFM)
Mode 1 for about 6 to 10 sheets
Mode 2 for about 11 to 15 sheets
Mode 3 for about 16 to 20 sheets
Mode 4 for about 21 to … sheets
Mode 5 only pressing the sheets
Press ‘Enter’ to confirm the settings.
3. Save settings. After all desired settings are adjusted press ‘Jobs’ (Fig.
3) and press ‘Enter’ (Fig. 4) to save the settings.
A “Saving Job” message appears for a few
seconds.