Konica Minolta bizhub PRESS 2250P - Manual (Page 15)

Operator Manual STR0202 & SFM0704
DBCB-0512-0066-V005
STR0202 2-Side Trimmer & SFM0704 Square Fold Module
V005 RI01 23-04-2012 DBCB-0512-0066-V005 - 15 -
4. Operating the STR (continued)
4.6 Paper Input Size Setup
Fig. 1 Fig. 2
Fig. 3
Step Action Remarks
1. Input Size adjustment Use the ‘
▲ / ▼ buttons’ to select ‘Input Size’ and press
the ‘Enter’ button (Fig. 1).
2A. Adjust ‘Input Size’ A4 / A5 Use the ‘ + / -‘ buttons (Fig. 2) to switch between ‘A4’
and ‘A5’ paper Input Size .
2B. Adjust ‘Input Size’ Length(A) /
Width (B) Use the ‘
▲ / ▼ ’ buttons (Fig. 3) to adjust the ‘Length
(A)’ or ‘Width (B)’ in mm and use the ‘ + / -‘ buttons to
adjust the values (A) or (B).
3. Save Input Size adjustments Save and confirm with [Enter] (Fig. 3).
NOTE: In the ”Input Size” menu of the STR the paper Input Size can set or adjusted.