Konica Minolta bizhub PRESS 2250P - Manual (Page 10)

Operator Manual STR0202 & SFM0704
DBCB-0512-0066-V005
STR0202 2-Side Trimmer & SFM0704 Square Fold Module
V005 RI01 23-04-2012 DBCB-0512-0066-V005 - 10 -
4. Operating the STR
This section explains how to use the STR in standard operation.
4.1 System Setup
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Step Action Remarks
1. Open the Top cover of the STR.
2. Turn on the STR with the Power
Switch
Attention: Check if the Trim Waste Bin Drawer is
closed, otherwise the STR displays
a ‘Cover Open’ error.
3. Close the Top cover of the STR.
4. Enter ‘Admin’ menu Press the ‘Admin’ button (Fig. 1)
5. Enter ‘System Setup’ menu Use the ‘
▲ / ▼ buttons’ to select ‘System Setup’ and
press the ‘Enter’ button. (Fig. 2)
6. Select System Setup with or
without SquareFold Module Select the correct System Setup e.g. STR (2 / 4 or 4 / 4)
(Fig. 3 and 4)
Save and confirm with [Enter]
Attention: After saving the STR will restart
(Fig. 4).
From either side (top or bottom) 40mm of the finished booklet should be free from staples to ensure
safe operation.
NOTE: The System Setup has to be done once.