Konica Minolta bizhub 282 - Manual (Page 86)

User Operations 3
362/282/222 3-19
Use
r Op
er
at
ions
Chapter 3
3
Type the new User Box Number and the currently set 8-digit User Box
Password.
4
Click the [Apply].
? What if the User Box Number entered is duplicated?
% If the User Box Number entered is duplicated, a message will ap-
pear that tells that the User Box Number entered cannot be used.
Click [OK] and type a new User Box Number that is not duplicated.
? What if there is a mismatch in the User Box Passwords?
% If there is a mismatch in the User Box Passwords, a message ap-
pears that tells that there is a mismatch in the User Box Passwords.
Click [OK] and enter the correct the User Box Password.
% If the Enhance Security function is set to [ON], entry of a wrong
password is counted as unauthorized access. If a wrong User Box
Password is entered three times, a message appears that tells that
the machine rejects any access to the User Box for any subsequent
authentication attempt. The machine is then set into an access lock
state. To cancel the access lock state, the Administrator of the ma-
chine must perform the Unlock operation. Contact the Administra-
tor of the machine.