Konica Minolta bizhub 282 User Manual
Page 35
2
Administrator Operations
2-18
362/282/222
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
8
Touch [Enter].
?
What if an Administrator Code (Administrator Password) different
from that which is currently registered is mistakenly entered?
% If there is a mismatch between the currently registered Administra-
tor Code (Administrator Password) and that which is entered, the
machine counts it as unauthorized access.
% If there is a mismatch between the currently registered Administra-
tor Code (Administrator Password) and that which is entered, the
Utility/Counter screen appears. Perform steps 1 through 8.
?
What happens if the Administrator Code (Administrator Password)
entered does not meet the requirements of Password Rules?
% If the Administrator Code (Administrator Password) entered in [New
Code] does not meet the requirements of Password Rules, a mes-
sage appears that tells that a mismatch is noted in the Administra-
tor Code (Administrator Password) entered. Perform steps 5
through 8 again. For details of Password Rules, see “Password
Rules” on page 1-11.
?
What happens if there is a mismatch in the Administrator Codes
(Administrator Passwords)?
% If there is a mismatch between the Administrator Code (Administra-
tor Password) entered in [New Code] and that which is entered in
[Retype New Code], a message appears that tells that there is a
mismatch in the Administrator Codes (Administrator Passwords).
Perform steps 5 through 8 again.
2
Note
Never forget the Administrator Code (Administrator Password). If the Ad-
ministrator Code (Administrator Password) is forgotten with the Enhance
Security function set to [ON], it becomes impossible to set the Adminis-
trator Code (Administrator Password) again. Contact your Service Rep-
resentative.