Konica Minolta bizhub 282 - Manual (Page 23)

2 Administrator Operations
2-6 362/282/222
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
% If the Enhance Security function is set to [ON], entry of a wrong
password is counted as unauthorized access. If a wrong Adminis-
trator Code (Administrator Password) is entered three times, a mes-
sage appears that tells that the machine accepts no more
Administrator Codes (Administrator Passwords) because of unau-
thorized access for any subsequent entry of the Administrator Code
(Administrator Password). The machine is then set into an access
lock state. To cancel the access lock state, turn off, and then turn
on, the main power switch of the machine. When the main power
switch is turned off, then on again, wait at least 10 seconds to turn
it on after turning it off. Be sure to allow an interval of 10 sec. or
more in order to ensure correct operations.
Here is the sequence, through which the main power switch and
sub power switch are turned on and off:
Turn off the sub power switch
→ Turn off the main power switch →
Turn on the main power switch
→ Turn on the sub power switch
? Is it possible to gain access to the Admin. Management mode while
a job is being executed?
% If an attempt is made to log on to the Admin. Management mode
while a job is being executed, the machine gives a message that
tells that it is now impossible to log on to the Admin. Management
mode. Click [OK] and try logging on to the Admin. Management
mode after the execution of the job is completed.
? What happens if another Administrator has logged on to the Admin.
Management mode using PageScope Web Connection?
% If you have already logged on to the Admin. Management mode us-
ing PageScope Web Connection, no operations can be made on
the control panel of the machine. If another Administrator has
logged on to the Admin. Management mode using PageScope Web
Connection, a message appears that tells that there is some other
Administrator who has already logged on to the Admin. Manage-
ment mode. Then, the machine does not accept any attempt to log
on to the Admin. Management mode from PageScope Web Con-
nection.
% If no operations are performed for 10 min. while the machine is in
the Admin. Management mode, you will automatically log off from
the Admin. Management mode.