Sangean DDR-43+ - Manual (Page 43)

41
GB
Bass control
5. Press the Equalizer button to cycle through the modes until “Bass”
appears on the upper line of the text display. The current bass
setting will be shown on the lower line.
6. To adjust the bass setting press and release the Tuning Up or Down
buttons until the desired level is displayed.
7. Press the Select button to revert to the play mode display.
To quickly cancel the effect of the treble or bass settings press
the Equaliser button until “Flat” appears on the upper line of the
text display. The treble and bass settings will be remembered for
the next time that you wish to adjust them.
Mute function
Pressing the Mute button will mute the output from the loudspeakers.
1. Press the Mute button to mute the sound output. The speaker volume
symbol on the display will disappear.
2. Press the Mute button again or one of the Volume buttons to un-mute
the sound output.