Sangean DDR-43+ - Manual (Page 13)

11
GB
Selecting a station - DAB+
1. When the unit is in DAB+ mode the upper line of the text display
normally shows the name of the station currently tuned.
2. Repeatedly press the Tuning Up or Down buttons to scroll through
the list of available stations on the lower line of the text display.
Stop pressing the Tuning buttons when you find the station that you
wish to hear. If you keep pressing one of the tuning buttons then the
unit will rapidly scroll through the list of available stations.
3. Press and release the Select button to cause the radio to tune to the
chosen station. The display may show “Now tuning” while your radio
finds the new station.
The use of memory presets is described on page 22.
4. Adjust the Volume to the required setting.
If after selecting a station the display shows “Service not available”
it may be necessary to relocate your radio to a position giving
better reception.
Secondary services - DAB+
1. Certain radio stations may have one or more secondary services
associated with them. If a station has a secondary service associated
with it the display will show “>>” next to the station name on the
station list. The secondary service will then appear immediately after
the primary service as you press the Tuning Up button.
2. Press and release the Select button to select the station.