Sangean DDR-43+ - Manual (Page 15)

13
GB
Display modes - DAB+ cont.
Finding new stations - DAB+
As time passes new stations may become available. To find new
stations proceed as follows:
1. With the unit in DAB+ mode (see page 10) press and release the
Auto-tune button. The display will then show “Local scanning”.
The radio will perform a scan of the DAB+ frequencies. As new
stations are found the station counter on the right-hand side of the
display will increase and stations will be added to the list.
2. To carry out a full scan of the entire DAB+ band press and hold the
Auto-tune button for more than 2 seconds and then release.
The display will show “Full scanning”. As new stations are found the
station counter on the right-hand side of the display will increase and
stations will be added to the list.
f.
g.
h.
Signal error
Bit rate/audio type
Time and date
Displays the signal error for the station
being listened to. The lower the number
the better the signal received.
Displays the digital bit rate and audio
type for the current DAB+ radio station.
Displays the current time and date.