Sangean DDR-43+ - Manual (Page 36)

34
Alarms
Your DDR-43 Plus sound system has two alarms which can each be set
to wake you to DAB+, FM radio, CD, iPod or buzzer alarm. The alarms
may be set while the unit is in standby mode or while playing.
1. Before setting an alarm ensure that the clock time is set
(see page 37). Press and release the Alarm button. “Alarm 1” will
show on the display.
2. Press the Tuning Up or Down buttons to select the required alarm,
1 or 2. Press and release the Select button to cause “Alarm setting”
to show on the display.
3. Press and release the Select button to choose alarm setting.
“Alarm: On/Off” will show on the upper line of the text display.
4. Press the Tuning Up or Down buttons to choose whether to set the
alarm to On or Off.
5. Press and release the Select button. If the previous selection was to
switch on the alarm, then “Alarm: Time” will show on the upper
line of the text display and the Alarm hour digits will flash. If Off
was selected, the unit will exit the alarm menu.
6. Press the Tuning Up or Down buttons to choose the alarm hour and
then press and release the Select button to enter the hour setting.
The Alarm minute digits will then flash on the display.
7. Press the Tuning Up or Down buttons to choose the alarm
minute and then press and release the Select button to enter the
minute setting. “Alarm: Mode” will show on the upper line of the
text display.