Lenovo S310 All-in-One User Manual
Page 70

Diagnostic Error Code
FRU/Action
015-198-XXX USB port test aborted
1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 51.
2. Flash the system and re-test. See “Flash update
3. Go to “Undetermined problems” on page 76.
015-199-XXX USB port test failed, cause unknown
1. Go to “Undetermined problems” on page 76.
2. Flash the system and re-test. See “Flash update
3. Replace component under function test.
018-000-XXX PCI Card Test Passed
No action
018-0XX-XXX PCI Card Failure
1. Riser card, if installed.
2. System board
018-195-XXX PCI Card Test aborted by user
1. PCI card
2. Information only Restart the test, if necessary
018-196-XXX PCI Card test halt, error threshold exceeded
1. Press F3 to review the log file
2. Restart the test to reset the log file
018-197-XXX PCI Card test warning
1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 51.
2. Re-run test.
3. Replace the component that is called out in warning
statement.
4. Replace the component under test.
018-198-XXX PCI Card test aborted
1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 51.
2. Flash the system and re-test. See “Flash update
3. Go to “Undetermined problems” on page 76.
018-199-XXX PCI Card test failed, cause unknown
1. Go to “Undetermined problems” on page 76.
2. Flash the system and re-test. See “Flash update
3. Replace component under function test.
018-250-XXX PCI Card Services error
1. PCI card
2. Riser card, if installed.
3. System board
020-000-XXX PCI Interface Test Passed
No action
020-0XX-XXX PCI Interface error
1. PCI card
2. Riser card, if installed.
3. System board
020-195-XXX PCI Test aborted by user
Information only Restart the test, if necessary
020-196-XXX PCI test halt, error threshold exceeded
1. Press F3 to review the log file.
2. Restart the test to reset the log file.
64
Lenovo S310 All-In-OneHardware Maintenance Manual