Lenovo S310 All-in-One - Manual (Page 62)

Diagnostic Error Code FRU/Action
000-000-XXX BIOS Test Passed No action
000-002-XXX BIOS Timeout 1. Flash the system. See “Flash update procedures”
on page 127.
2. System board
000-024-XXX BIOS Addressing test failure 1. Flash the system. See “Flash update procedures”
on page 127.
2. System board
000-025-XXX BIOS Checksum Value error 1. Flash the system. See “Flash update procedures”
on page 127.
2. System board
000-026-XXX FLASH data error 1. Flash the system. See “Flash update procedures”
on page 127.
2. System board
000-027-XXX BIOS Configuration/Setup error 1. Run the Setup Utility program.
2. Flash the system. See “Flash update procedures”
on page 127.
3. System board
000-034-XXX BIOS Buffer Allocation failure 1. Reboot the system.
2. Flash the system. See “Flash update procedures”
on page 127.
3. Run memory test
4. System board
000-035-XXX BIOS Reset Condition detected 1. Flash the system. See “Flash update procedures”
on page 127.
2. System board
000-036-XXX BIOS Register error 1. Flash the system. See “Flash update procedures”
on page 127.
2. System board
000-038-XXX BIOS Extension failure 1. Flash the system. See “Flash update procedures”
on page 127.
2. Adapter card
3. System board
000-039-XXX BIOS DMI data error 1. Flash the system. See “Flash update procedures”
on page 127.
2. System board
000-195-XXX BIOS Test aborted by user Information only Restart the test, if necessary
000-196-XXX BIOS test halt, error threshold exceeded 1. Press F3 to review the log file.
2. Restart the test to reset the log file.
000-197-XXX BIOS test warning 1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 51.
2. Re-run test.
3. Replace the component that is called out in warning
statement
4. Replace the component under test.
56 Lenovo S310 All-In-OneHardware Maintenance Manual