Lenovo ThinkServer TD200 - Manual (Page 91)

Option Description Values
-l Login permission
attribute String of up to 63 characters for string
-m Domain source Extract search domain from login ID, use only
configured search domain, try login first then
configured value
-n Service name String of up to 15 characters for service_name
-p Client password String of up to 15 characters for client_pw
-pc Confirm client
password String of up to 15 characters for confirm_pw
Command usage is: ldap -p client_pw -pc confirm_pw
This option is required when you change the client
password. It compares the confirm_pw argument with
the client_pw argument, and the command will fail if
they do not match.
-r Root entry
distinguished name
(DN) String of up to 63 characters for root_dn
s1ip Server 1 host name/IP
address String of up to 63 characters or an IP address for host
name/ip_addr
s2ip Server 2 host name/IP
address String of up to 63 characters or an IP address for host
name/ip_addr
s3ip Server 3 host name/IP
address String of up to 63 characters or an IP address for host
name/ip_addr
s1pn Server 1 port number A numeric port number of up to 5 digits for
port_number.
s2pn Server 2 port number A numeric port number of up to 5 digits for
port_number.
s3pn Server 3 port number A numeric port number of up to 5 digits for
port_number.
-u UID search attribute String of up to 23 characters for search_attrib
-v Get LDAP server
address through DNS Off, on
-w Allows wildcards in
the group name Off, on
-h Displays the command
usage and options
ntp command
Syntax
ntp [options]
options:
-en state
-i
hostname
-f frequency
-synch
Description
Use the ntp command to display and configure the Network Time Protocol (NTP).
Chapter 7. Command-line interface 85