Addonics Technologies ZSAES256EU - Manual (Page 4)

Reset switch
Under certain applications, the RESET button enables the connecting and
disconnecting of the Cipher Z-Drive Enclosure without restarting the system.
Following are examples of such applications:
a. When the cipher key is removed from the Z-Drive Enclosure, pressing the
reset switch will clear the key code and remove the drive icon. This is good for
security when the Z-Drive Enclosure is left unattended.
b. Likewise when the Z-Drive Enclosure is connected and powered on with a
cipher key, pressing the RESET button will initialize the drive. Note that if the hard
drive is not encrypted or if the cipher key does not match with what is on the
encrypted hard drive, it will show up as an unallocated drive under the drive
management screen and no drive icon will show up on the My Computer folder.
It’s very important to make sure that the correct cipher key is used on the hard
drive. Proceeding to initialize the hard drive will erase all the data beyond
any possibility of recovery.
Green Power LED
In order for the green power LED of the CipherChain mounted on the Cipher
Z-Drive Enclosure to turn on, the cipher key must be inserted prior to powering or
resetting the Cipher Z-Drive Enclosure. If the power LED does not light up, the
computer will not detect the hard drive connected to the Cipher Z-Drive
Enclosure.
Yellow Power LED
Lights up when there is drive activity.
www.addonics.com
Phone: 408-573-8580
Fax: 408-573-8588
Email: http://www.addonics.com/sales/query/
CONTACT US