Kodak EZ200 - Manual (Page 33)

17
Chapter 3
A low, double tone could also indicate a low light condition. See page 46 in
the Troubleshooting section.
Shooting Silent Movie Clips
You can capture and store up to six, ten-second silent movie clips with your
EZ200 in Digital Camera mode.
The camera sounds a double tone when you start and stop taking the clip.
The picture count on the LCD increases by one.
If the camera beeps a low, double tone and does not operate, make sure the
focus ring is set to the
position (see page 12).
A low, double tone could also indicate a low light condition. See page 46 in
the Troubleshooting section.
1 Press the Mode button until the
icon is displayed in the LCD.
2 Set the focus ring to the
position.
3 Center the subject in the viewfinder.
4 Press the Shutter button completely
down to begin taking the silent movie
clip. Release the Shutter button to
end the clip.
Maximum clip length is ten seconds.