Kodak DC50 - Manual (Page 74)

70 January 1996
Picture Is Too Light
Cause Solution
The flash is not needed. Change to automatic flash by
following the instructions in the
Camera Features section.
The subject is too close
when the flash was used. Move so there is at least 2.3 feet
(70 cm) between the camera and
the subject.
The exposure setting
needs to be adjusted. Adjust the exposure as described in
the
Camera Features section.
The light sensors are dirty. Clean the light sensors as described
in the
Maintenance section.
The light sensors are
covered. Hold the camera so your hands
or other objects do not cover the
light sensors.
Refer to the Camera Features section
for the location of the sensors.