Kodak DC50 - Manual (Page 30)

26 January 1996
SELECT Button
The SELECT button allows you to move through the selections that are
available for each feature. Each time the SELECT button is pressed, a
feature setting flashes to indicate that it is currently selected and active.
A selected feature returns to the “home” position after a selection is
made in the following cases:
– The MODE button is pressed.
– The shutter button is pressed.
– A zoom button (telephoto or wide angle) is pressed.
– The ERASE button is pressed.
– No action is taken within four seconds after the SELECT button
is pressed.
ERASE Button
The ERASE button allows you to erase all of the pictures that are
stored in the camera’s internal memory or on an optional memory
card. The ERASE button can be used only when the Erase Images
icon is selected.
NOTE: Refer to “Erasing Pictures” in the DC50 zoom camera LCD
Icons section for step-by-step instructions for erasing pictures
from the camera or the memory card.
Erasing a memory card is also described in the Using
Removable Memory Cards section.