Kodak DC50 - Manual (Page 70)

66 January 1996
Troubleshooting
This section should help you resolve any problems which you may
encounter when using your DC50 zoom camera. If you still have
trouble with your camera after reading this information, refer to the
“Getting Help” section.
Problems and Solutions
LCD Display Does Not Appear
Cause Solution
The camera is not on. Pull the sliding cover away from the
camera to turn it on.
The camera is in power
save mode. Press any button to activate (“wake”)
the camera.
The batteries are low,
empty, or not installed. Replace the batteries or use a
power adapter.
The batteries are not
installed correctly. Reinstall the batteries.
For information about installing
batteries, refer to the
Using the
Camera section.
The power adapter was
disconnected from the
camera while the camera
was still on. Plug the power adapter back into the
camera, turn the camera on and then
off again, and then disconnect the
power adapter from it.