Kodak DC50 - Manual (Page 29)

25 January 1996
MODE Button
The MODE button allows you to move through the icons in the LCD.
Each time you press the MODE button, a feature icon flashes to
indicate that it is currently selected and active.
NOTE: The icons in the LCD are described in the DC50 zoom camera
LCD Icons section.
The camera is at the “home” position before you press the MODE
button. Press the MODE button to step through the icons in the LCD.
When the selected icon flashes, you can specify a feature for that icon
by pressing the SELECT button.
After you make selections, the camera
returns to the “home” position.
Mode selection is done and the camera returns to the “home” position in
the following cases:
– The shutter button is pressed.
– A zoom button (telephoto or wide angle) is pressed.
– The ERASE button is pressed (except when the Erase Images
icon is selected).
– No action is taken within eight seconds after the MODE button
is pressed.