Kodak DC50 - Manual (Page 64)

60 January 1996
MACINTOSH Systems
You can connect the DC50 zoom camera to a serial port on your
Macintosh computer.
IMPORTANT: Use only the cable that is provided with the
DC50 zoom camera.
1. Push the sliding cover closed.
The camera is off.
2. Plug one end of the Macintosh cable into the modem port or printer
port on the back of your Macintosh computer.
NOTE: If both ports are in use, disconnect the cable from one of
the ports and connect the camera cable. Make sure that the
cable is correctly oriented. Refer to your computer manuals
for information about the ports on your computer.
3. Lift the rubber tab located on the left side of the camera.