Kodak DC260 - Manual (Page 72)

6-5
6
Connecting
connection.
If your computer meets all the conditions except that no USB Supplement to
OSR2 is present, refer to the README file for instructions on installing the
USB Supplement.
Connecting via a USB cable
The camera can connect to a computer using the USB cable included in your
camera package.
To connect to your computer with a USB cable:
Infrared transceiver
Infrared is invisible light that the camera uses to transfer pictures through the air
without cables or wires. Like your television remote, the camera requires a clear
line of sight between its infrared transceiver and the infrared port on the
computer.
IrDA (Infrared Data Association) compliant devices use both a transmitting mode
and a receiving mode which allows these devices to acknowledge the information
was received, generate responses, and even automatically detect the presence of
another infrared device.
1 Plug one end of the USB cable into the USB port
on the back of your PC.
2 Open the serial port on the side of your camera.
3 Plug the other end of the USB cable into the
camera’s serial port.
4 Turn on the camera.