Kodak DC260 User Manual
Page 36
3-10
Capture
☞
Pressing the DEFAULT
softkey restores the
default Capture
Preference values.
1
Press the down arrow to select the
particular setting you want to change.
✔
File Type—the format in which pictures
are saved, either FlashPix (FPX) or
JPEG (JPG).
✔
Quickview—displays the picture just
taken for a duration between 0.5 and 30
seconds.
✔
Auto Rotate—rotates pictures
automatically in response to a sensor
that senses the orientation of the camera
and rotates pictures to a vertical plane.
The Auto Rotate sensor does not
function well when you are above the
subject with the lens perpendicular to
the floor. In such cases, Auto Rotate
should be OFF.
✔
System sounds—plays shutter sounds
when a picture is taken and alert sounds
when an error occurs.
✔
Sleep Timeout—the number of minutes
the camera will sit inactive with the
LCD on before it goes into the low
power mode. In the “sleep” mode, the
LCD turns off, the Status Display on
the top of the camera remains on, and
you can take a picture.
2
Press the left and right arrows to change
each setting.
3
When you are satisfied with the settings,
press the DONE softkey.