Kodak DC260 - Manual (Page 50)

4-6
Viewing the remaining memory
The Review screen displays a reminder of the amount of memory remaining on
the memory card.
The memory bar gives two different indications about your camera’s memory.
The Memory Filled Status indicator shows the amount of used memory (in blue)
and the amount of available memory (in white).
As you scroll through your pictures, the Picture Location Indicator moves to
represent the position of the current picture in the list of pictures already on the
camera. For example, if the selected picture is the first of 20 pictures on the
camera, the indicator is all the way to the left. As you scroll through the pictures,
the indicator moves to the right with each new picture. At picture 10, the
indicator will be in the middle of the blue portion of the Memory Filled Status
indicator. At picture 20, the indicator will be all the way to the right of the blue
area.
Marking pictures for an action
When you want to select a number of pictures and carry out an action on them,
you must first mark each picture. Marked pictures can be deleted, copied from
camera to camera, or moved from album to album (DC260 only).
To mark a picture:
☞
When you have marked a
picture, the softkey
changes to UNMARK.
1 Scroll to find the picture you want to select.
Use any of the three methods described in the
“Viewing pictures” section.
2 Press the MARK softkey.
The selected picture is marked, denoted by
the notched lower right corner. It remains
marked until you carry out an action on it.
☞
To mark the entire contents of the
memory card, hold down the MARK
softkey for 2 seconds.
Memory Filled Status
Available memory
Picture Location Indicator