If you have an apple macintosh computer, Setup procedure – Kodak DP800 User Manual

Page 21

The products will tell your Macintosh that a serial com-
munications device is connected. This means that the
Interactive Remote Control together with the Apple
Macintosh driver will work just like your ordinary mouse.

Setup procedure

◆

Follow the User Manuals guide for connecting the
product to a Macintosh.

◆

Connect the serial data cable (8 pin) to the serial
connector on the buffer box of your 5m buffer cable.

◆

Attach the other end to either the MODEM or
PRINTER port on your Macintosh.

◆

Turn on the product.

◆

Turn on your Macintosh.

To install the Apple Macintosh
driver software

◆

Insert the Apple Macintosh driver diskette

◆

Make sure the system folder is visible and closed.

◆

Drag the Remote Controller onto your system folder
icon.

◆

The Macintosh will do the rest.

◆

If prompted about placing the Remote Controller in
the control panel folder answer OK.

◆

It is not necessary to restart your Macintosh.

Refer to the section:
Special consideration

If you have an Apple Macintosh
computer