Kodak 5100 - Manual (Page 9)

Product Overview
On/Off Light
Light Status Cause Action/Solution
The printer is turned off. Press the On/Off button to turn
the printer on.
The printer does not have power
applied. Check the power cord light
status.
On/Off light is off.
The printer needs attention. Check to see if the Photo Tray
light is on. If the Photo Tray light
is on for more that 20 seconds
and the On/Off light does not
come on, disconnect the power
for 5 seconds and reconnect the
power. If the Photo Tray light
does not go out after 20 seconds
and the On/Off light comes on,
contact Kodak for assistance.
The On/Off light is a steady
green. The printer is properly powered
up, on, and ready. None: You may start printing,
copying, scanning, or other
tasks.
The printer is busy. None: Normal operation when
performing a print, copy, scan, or
other job request. The On/Off light is a flashing
green.
The printer is in the initializing
process. None: Please wait and allow the
printer to complete the
initialization process (About 30
seconds). If the flashing green
persists, you may have an issue
with the printer. Visit Kodak.com
for additional troubleshooting
steps or contact your local
Kodak Call Center.
The On/Off light is a flashing
yellow. The printer has detected an error
condition. Disconnect power for 5 seconds
and reconnect power. If the
condition persists, please check
the Quantity Display for
additional codes. Contact Kodak
for assistance.
Check the status monitor on your
computer for a message.
The On/Off light is a flashing
red. The printer has detected an error
condition that needs your
attention. Please check for other Lights to
be on and follow the instruction
for that Light.
Check the status monitor on your
computer for a message.
User Guide 5