Kodak 5100 - Manual (Page 45)

6
Scan
User Guide 41
Scan
Scanning is the process of converting text and pictures into an electronic format for your computer. The
Scan mode becomes active when you press Scan. The Scan status light is always on when your AiO printer
is in Scan mode. To use the scan features, your AiO printer must be connected to a computer.
IMPORTANT: Use the Kodak AiO Home Center software to configure scan settings for the control panel.
Scan from Control Panel (Windows)
To scan to a file
1 Set the Default scan destination to File with the Kodak Home Center software.
2 Place your original face down in the right front corner of the scanner glass.
3 Press Scan.
4 Press Start. The original is scanned and saved to a file on your computer according to the scan settings
in the Kodak Home Center software.
To scan to an application
1 Set the Default scan destination to Application with the Kodak Home Center software.
2 Place your original face down in the right front corner of the scanner glass.
3 Press Scan.
4 Press Start. The original is scanned into Kodak Home Center where you can open it with the application
of your choice.
Scan from Control Panel (Macintosh)
To scan to a current settings name and location
1 Set the Scan Destination to File with the Kodak Home Center software.
2 Place your original face down in the right front corner of the scanner glass.
3 Press Scan.
4 Press Start. The original is scanned and saved to a file on your computer according to the scan settings in
the Kodak Home Center software.
To scan and select name and location
1 Set the Scan Destination to Application with the Kodak Home Center software.
2 Place your original face down in the right front corner of the scanner glass.
3 Press Scan.
4 Press Start.
5 Select a destination from the Save dialog.