Vollrath F431 - Manual (Page 14)

8
When Using Two Mix Containers or Bag Connection
Systems (BCS) on one Side (optional kit #2183189):
1. The F431 can be confi gured to operate with only
one freezing cylinder turned on. This may be done if
only one fl avor is being dispensed during slow times.
In this case, running only one freezing cylinder will
help minimize product breakdown, while reducing
mix container fi lling or mix bag replacement.
2. Connect two mix containers or two mix bags as
described above, but connect both containers to the
mix line manifold of the freezing cylinder you will be
using.
C. MIX LOW LEVEL INDICATOR ADJUSTMENT
The sensitivity of the “Mix Low” indication that displays on
the control panel can be adjusted to operator preference. If
more advanced notice of low mix is required, simply loosen
the black adjustment knobs located on the sensor brackets
at the back of the machine cabinet, and slide the bracket
upwards. If the “Mix Low” message appears while there is
still suffi cient mix in the container, slide the bracket down-
ward. Be sure to tighten the adjustment knobs after properly
positioning the sensor (see Figure 2-6).