Vollrath F431 - Manual (Page 12)

6
3. Connect elbow fi tting to free end of tubing. Connect
opposite end of elbow to 1/4" ID tan tubing on the
left side of pump head. Secure with hose clamps
(see Figure 2-3 and 2-4).
When Using Bag Connection System (BCS) with Two
Bags Per Side (optional kit #2183189):
1. Connect 3/8" (9,5mm) ID plastic food grade tubing
to a bag adapter. Secure with hose clamps. This
bag adapter will connect to the bag nearest the
front of the machine.
2. Slide the hose clip over free end of 3/8" (9,5mm)
ID plastic food grade tubing. Attach free end of
tubing to a manifold adapter. Secure with large
hose clamp or equivalent. Push the manifold
adapter into the left port of the mix inlet manifold
and secure with retaining clip. (See Figure 2-7).
3. Connect 3/8" (9,5mm) ID plastic food grade tubing
to a bag adapter. Secure with hose clamps. This
bag adapter will connect to the bag nearest the
back of the machine.
Figure 2-5 Connecting Mix Pick-up Assembly
Figure 2-4 Mix Pump Connections for Standard Mix Container