Silent Call SD4-SS - Manual (Page 21)

21
the following steps:
1. Once a suitable location has been determined, install the mounting
base on the ceiling or on the wall (if local ordinances permit). Use
the two screws and anchors provided.
2. Turn the detector in a clockwise direction in the mounting base
until it clicks into place.
3. Test the detector immediately after completing the installation as
described in the TESTING section of this manual.
•
DO NOT attach the detector to removable ceiling panels.
Attach the detector across panel support as shown in Figure 9.
Figure 8: Detector Mounting Base
Figure 9: Mount Detector Across Ceiling Panel Support.