Revolabs Solo Executive Operation Manual - Manual (Page 19)

- 16 -
Using the Solo XLR Microphone Wireless Adapter
The Revolabs Solo™ Universal Wireless Adapter for Handheld Microphones,
shown in the following figure, is connected to your existing handheld dynamic
microphones for wireless freedom during open mic meetings, Q&A sessions,
classrooms, etc.
1. Mute button — press to mute, un-mute and pair microphone.
2. Rubber collar — durable and impact/strain protection.
3. XLR Female connector — balanced audio for dynamic microphones.
4. LED display — visual status for mute, un-mute, and pairing.
5. Audio Out port — accepts the 2.5mm plug for the earpiece.
6. Power/Charging Port — docks to all Solo Charger Bases.
To use the Revolabs Solo™ Universal Wireless Adapter:
1. Remove the Microphone Adapter from the Charger Base.
The adapter turns on and mutes automatically when removed from Charger
Base (flashing RED LED). The XLR Microphone Adapter is attached to a
standard dynamic microphone to convert it from a wired microphone to a
wireless microphone (see following figure).