Revolabs FLX2 Advanced - Manual (Page 59)

59
Technical Specifications
Models
The Revolabs FLX2 System is available with a variety of configurations to provide the
best audio capture in the industry. The following is a list of the available models. All of
these models work with analog telephone lines.
10-FLX2-200-POTS
FLX2 System w/ 2 Omni Microphones
10-FLX2-101-POTS FLX2 System w/ 1 Omni & 1 Wearable Microphone
10-FLX2-002-POTS FLX2 System w/ 2 Wearable Microphones
10-FLX2-020-POTS FLX2 System w/ 2 Directional Microphones
10-FLX2-200-DUAL-POTS FLX2 System w/ 2 Omni Microphones and 2 Speakers
FLX
Wireless Technology
DECT DECT 6.0 for US, ETSI ETS 300 175 for other countries
Bluetooth BT 2.1 + EDR
Wireless Range
DECT 65 feet, 20 meters
Bluetooth Class II, 33 feet, 10 meters
Security (DECT / Bluetooth) DECT: 128 bit encryption
Noise Cancelation Noise cancellation on the Microphone
Echo Cancelation Acoustic echo canceller for Speaker/Microphone
Line echo canceller for analog telephone line.
RF Shield No cell phone interference due to RF Armor TM technology
Language versions System messages and menus in English; Documentation
in English
Certifications / Regulatory
Compliance
Electrical Safety UL/CSA, EN 60950
Radio / Telephone Part 68, IC-CS03, TBR 21, A-Tick
Environmental Requirements 0°C - 40°C; 20% - 80% non-condensing humidity
Warranty 1 year
Speaker
Dimensions Speaker 157mm x 93mm diameter
Weight 600.3g
Bandwidth 120-11,000 Hz from Analog IN. This is reduced for
telephone calls based on the bandwidth supported by the
phone transport.
Battery life (talk time) 8 hours.
Charge time 3 hours
Microphones
Dimensions Microphones 94.2 x 24.6mm x 18.5mm (omnidirectional Microphone)
Weight 28.6g (omnidirectional Microphone)