Revolabs FLX2 Advanced - Manual (Page 58)

58
Device LED Indicator Status
Green flash every second
o
Connected, no call in progress, Microphones in
Charger Base
o
Connected, no phone call in progress,
Microphone(s) outside of the Charger Base
unmuted
o
Connected, call in progress, Microphones are not
muted using All Mic Mute or Master Mute.
o
Microphone(s) might still be individually muted.
Red flash every second
o
Connected, phone call in progress, Master Mute
or “All Mic Mute” is ON, all microphones are
muted.
o
Connected, no phone call in progress,
Microphone(s) outside of Charger Base, “All Mic
Mute” is ON, all Microphones are muted.
Alternating Green – Yellow* flash
o
Connected, battery low, no call in progress
o
Connected, battery low, call in progress,
Microphones are not muted using All Mic Mute or
Master Mute. Microphone(s) might still be
individually muted.
Alternating long Red – Yellow* flash
o
Connected, battery low, no call in progress, “All
Mic Mute” is ON, all Microphones are muted
o
Connected, battery low, call in progress, Master
Mute or “All Mic Mute” is ON, all Microphones
muted
Flashing Yellow* – Red – Yellow* –
Green
Searching for a connection to the base
The speaker will try to re-establish the link
for about 10 minutes, then power off.
Alternating slow Red - Green flash
Speaker is not paired to a Base Station
The speaker will power down after two minutes.
Steady Red
o
Speaker is being powered down
o
Speaker is in pairing mode.
Groups of five rapid Red flashes Speaker is in a fault condition.
Device LED Indicator Status
Base Station
Long solid on, then a long solid off Power On Boot Process
Double flashes every second
Operating Mode indicating that Base Station is
functional.
Skip every fifth double flash
Fault indication. This also indicates past faults that
have no bearings on current operation
Continuous Fast Flashing
Updating non-volatile memory as part of software
update
Off No Power
* In some Speakers the LED Indicator color Yellow might look like Red.
Reset to Factory Defaults
See page 41 for a description on how to reset the FLX2 Conference Phone back to its
factory defaults.