Norgren V3 Syringe Drive Pump - Manual (Page 3)

V3 Syringe Drive Pump
PDS-0004 REV. 6 5/13
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
© Norgren Kloehn, Inc. 2012
Valves - Ceramic:
Configuration P/N - Distribution Non - Distribution Orifice Size
2-WAY 30138 — 0.031
2-WAY 30149 — 0.059
3-WAY 30139 30144 0.031
3-WAY 30150 30155 0.059
4-WAY 30140 30145 0.031
4-WAY 30151 30156 0.059
5-WAY 30141 30146 0.031
5-WAY 30152 30157 0.040
6-WAY 30142 30147 0.031
6-WAY 30153 30158 0.040
Wetted Materials: PEEK, Alumina Ceramic, FFKM, Teflon
Port connection is 1/4-28 UNF.
All valve ports are accessible when using syringes listed and Kloehn spring-loaded fittings
(recommended) or standard fittings (Upchurch #P200 fittings or equal).
Valve weep hole port connection is #6-40 UNF-2A. Fittings for this port are available in two materials;
PEEK (PT # 24528); and stainless steel 303 (PT # 24529). For use with 1/16 OD tubing.
Standard Syringes:
Size Syringe Assy ZDV Assy Orifice Size
50ul 23164 27960 * 0.023
100ul 23165 27961 * 0.023
250ul 23166 28006 0.031
500ul 23167 28007 0.031
1.0ml 23168 28008 0.073
2.5ml 23169 28009 0.073
5.0ml 23170 28010 0.073
Syringe construction:
Syringes have Borosilicate glass, Teflon seal and tip wetted surfaces.
Syringe part numbers followed by an asterisk (*) have tips with PTFE coated stainless steel 316L wetted components.
SP-K Syringes:
Size Syringe Assy ZDV Assy Orifice Size
50ul 24411 27958 * 0.023
100ul 24412 27959 * 0.023
250ul 24413 28011 0.031
500ul 24414 28012 0.031
1.0ml 24415 28013 0.073
2.5ml 24416 28014 0.073
5.0ml 24417 28015 0.073
Syringe construction:
Syringes have Borosilicate glass, Teflon seal, and UHMW (B-1000 black) plunger tip wetted surfaces.
Syringe part numbers followed by an asterisk (*) have tips with PTFE coated stainless steel 316L wetted components.