Norgren Syringe V3 - Manual

Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
© Norgren Kloehn, Inc. 2013
10/13 PDS006 REV 8
Syringe V3 (3cm) Product Line
Physical
Length (Dispensed)
2.37"; (Aspirated): 3.55"
Thread Type
¼-28 UNF-2A
Test Pressure
80 psi
Environmental
Operating Temperature
50°F to 104°F (10°C to 40°C)
Storage Temperature
13°F to 185°F (-25° to 85°C)
Relative Humidity
Up to 100%
Chemical
Standard Syringe Seal
PTFE
Wetted Materials
Borosilicate Glass, PCTFE, PTFE
(or UHMW) (smaller sizes ZDV tips
are PTFE coated 316L)
Syringe tips
Lubricated with laboratory-
grade Silicone
The V3 syringe line is designed to couple to a
Versa 3 Syringe Pump and standard V3 valve
assembly. These syringes are rated to 80 psi and
typically used in various types of instruments and
analyzers serving clinical, medical, and analytical
instrumentation applications. An array of syringe
volumes are available that can be dispensed and/or
aspirated over a full 3cm stroke.
Mechanical
*Add 1 pound drag force to non-lubricated plunger tip requests.
Syringe Sizes 50ul 100ul 250ul 500ul 1.0ml 2.5ml 5.0ml
Orifice Diameter (in) .023 .023 .031 .031 .073 .073 .073
Syringe(End Cap) Diameter (in) 0.43 0.43 0.43 0.43 0.43 0.56 0.72
Button Diameter (in) 0.25 0.25 0.25 0.25 0.3 0.3 0.3
*Max Drag Force (lbs)
3.0 3.0 3.0 3.0 3.0 3.0 6.0
7.0 7.0 7.0 7.0 7.0 7.0 10.0
PTFE
UHMW
Standard Syringes:
Syringe Assy
Size Syringe Assy (No Silicone) ZDV Assy Orifice Size
50ul 23164 22007 27960 * 0.023
100ul 23165 22008 27961 * 0.023
250ul 23166 22009 28006 0.031
500ul 23167 22010 28007 0.031
1.0ml 23168 22011 28008 0.073
2.5ml 23169 22012 28009 0.073
5.0ml 23170 22013 28010 0.073
Syringe construction:
Syringes have Borosilicate glass, PTFE seal and tip wetted surfaces.
Syringe part numbers followed by an asterisk (*) have tips with PTFE coated stainless steel 316L wetted components.